![Specs Specs](/uploads/1/1/9/5/119515166/111482484.jpg)
Jeep CJ-8 Scrambler: 1981-1985 Introduced in 1981, the Scrambler was a Jeep similar to the CJ-7, but with a longer wheelbase. Known internationally as the CJ-8, it was available in either hard- or soft-top versions. Less than 30,000 Scramblers were built and are extremely popular among collectors today. Jeep Comanche (MJ): 1986-1992. This transmission was called the Torque-Command by Jeep. The 727 is mechanically compatible with the Jeep/Mopar 4.0L I6 engine, but because the 4.0L requires a crank position sensor normally mounted at the bellhousing, this adaptation gets more complicated. The use of a crank sensor mounted at the front harmonic balancer would be required. With a maximum top speed of - mph (km/h), a curb weight of 2707 lbs (1228 kgs), the CJ 7 5.0 V8 has a naturally-aspirated V 8 cylinder engine, Petrol motor. This engine produces a maximum power of 128 PS (126 bhp - 94 kW) at 3600 rpm and a maximum torque of 296.0 Nm (218 lb.ft) at 3600 rpm.
Engine 'Go-Devil' L-Head Number of cylinders....................4 Bore................................3 1/8' Stroke..............................4 3/8' Piston Displacement....................134.2 cu. in. Compression Ratio.....................6.48 to 1 Horsepower -- SAE....................15.6 Horsepower (actual @ 4,000 RPM)........60 Torque (max. @ 2,000 RPM).............105 Lbs. Ft. Dimensions and Capacities Wheelbase...........................80' Tread...............................48 1/4' Overall Width.........................59' Overall Height (Top up)..................69 3/8' Overall Height (Top down)...............52 3/8' Overall Length.........................122 3/4' Road Clearance........................8 5/8' Weight -- Maximum Payload..............800 lbs. Shipping (Less water, oil and fuel)...2,037 lbs. Curb (Including water, oil and fuel)..2,137 lbs. Gross (Loaded)................2,937 lbs. Maximum Approved Draw Bar Pull (Continuous Operation)................1,200 lbs. Fuel Tank Capacity......................10.5 gals. Cooling System Capacity..................11 qts. Lamp Bulbs Head Lamp (7 in. Sealed Beam Type) Upper Beam.........................45 watts Lower Beam........................35 watts Parking Lamp Bulb......................3 CP-SC Tail Lamp Bulb.........................21-3 CP-DC Instrument Lamp Bulb....................3 CP-SC Fuse (Thermal Type) -- On Light Switch......30 Amperes Lubrication Capacities Engine Crankcase -- oil filter empty (quarts).5 US / 4 1/4 Imp. Transmission and Transfer Case (pints).....6 1/2 US / 5 1/2 Imp. Differential - Front Axle (pints)...........2 1/2 US / 2 Imp. Differential - Rear Axle (pints)............2 3/4 US / 2 1/4 Imp. Oil Bath Air Cleaners (pints).............1 1/4 US / 1 Imp. Brake System Fluid (pints)...............3/4 US / 5/8 Imp. Location of Serial Number: Plate on outside left frame side rail at the front and on instrument panel. Location of Engine Number: Stamped on water pump boss. | x x 79.37 mm. 111.12 mm. 2199.53 cc. 203.20 cm. 122.55 cm. 149.86 cm. 176.21 cm. 133.03 cm. 311.78 cm. 21.90 cm. 362.88 kg. 961.63 kg. 1006.99 kg. 1369.87 kg. 544.32 kg. 39.74 litres 10.41 litres No. 63 No. 1158 No. 63 4.73 litres 3.7 litres 1.18 litres 1.30 litres Dosens of adobe flash player download popups mac. 591.40 cc. 354.84 cc. |
Lubrication Specifications
http://www.esanexin1985.simpsite.nl/best-email-for-mac-users. From connecting people across nations to establishing a communication centred way of life, the World Wide Web assists users in almost everything.
Torque Specs Aluminum
Chassis Lubrication Transmission and Transfer Case Differentials -- Front and Rear Steering Gear Wheel Bearings Universal Joints (Front Axle Shaft) Universal Joints (Propeller Shaft) Power Take-Off Housing Air Cleaner Governor Engine | Type Lube. Chassis Lube. Mineral Gear Oil Hypoid Oil Steering Gear Lube. Wheel Bearing Lube. Universal Joint Lube. Chassis Lube. Mineral Gear Oil Engine Oil Engine Oil Engine Oil | Winter No. 0 SAE 80 SAE 90 SAE 140 No. 2 No. 0 No. 0 SAE 80 Same Grade as used in engine Same Grade as used in engine See Below | Summer No. 1 SAE 90 SAE 90 SAE 140 No. 2 No. 1 No. 1 SAE 90 Same Grade as used in engine Same Grade as used in engine See Below |
Above 90º F.........SAE 30
Not Lower than 32º F..SAE 20 or 30
As Low as +10º F....SAE 20 W
As Low as -10º F.....SAE 10 W
To temperatures below -10º F, use SAE 10 W plus 10% kerosene.
Not Lower than 32º F..SAE 20 or 30
As Low as +10º F....SAE 20 W
As Low as -10º F.....SAE 10 W
To temperatures below -10º F, use SAE 10 W plus 10% kerosene.
Valve and Ignition Timing
X X Inlet opens 9 degrees before top centre Inlet closes 50 degrees after bottom centre Exhaust opens 47 degrees before bottom centre Exhaust closes 12 degrees after top centre Spark Setting Spark set top centre with automatic spark controls at rest, when using low octane fuel. Firing Order Tappet setting for valve timing Number of flywheel teeth | Piston Measurements From Top Centre .039' (9.91 mm.) 3.772' (95.81 mm.) 3.799' (96.49 mm.) .054' (0.14 mm.) 'IGN' 5º BTC X X X X 1-3-4-2 .020' (0.51 mm.) 97 |
3.7 Jeep Head Torque Specs
* All specifications taken from Your Operation and Care Manual Universal Jeep Model CJ-2A (second edition) copyright 1946 by Willys-Overland Motors, Inc.
Torque Specs 3.8 Gm
Next page in Operations Manual
Return to Operations Manual Contents
Return to Operations Manual Contents